ENGINE VISUALIZATION

Visualization of the interior of an engine

Engine Visualization

Internal visualization of engine and transmission used in automobiles / industrial machines. It is possible to observe the internal oil flow inside.

It can be used to observe the bubble generation and self-weight oil flow, which is difficult to analyze using by software simulation.

This sample shows you the actual movement of engine. When the handle is turned, LED will be lighted at ignition timing.

TECHNOLOGY
  • Machine individual parts and weld them together.
  • Modeling is well-designed and some bolts are used for reinforcement so that it can withstand high pressure.
 
MATERIALS
  • Polycarbonate
 
THREAD INSERT
  • Helical insert to be used if necessary


Please feel free to contact us.

Adequate support will be provided by our experienced designers until prototype completion.

Visualization model of a car engine
Back to Portfolio
 

COPYRIGHT © 2020 INAC US. ALL RIGHTS RESERVED. INAC Inc  – PRIVACY POLICY

STEP5: Quality Assurance and Precision Inspection

A quality inspection is performed. At INAC, where quality comes first, we use CMMs, gauges, and other equipment for precision checks.

STEP4: Post-Processing and Finishing

Finishing is done by removing the supports, polishing, and applying transparency treatment. It is also possible to paint and apply plating to the formed product.

STEP3: UV-Laser Print Formation (SLA Process)

Output: The product is formed by irradiating the liquid with a laser beam of UV light and laminating it. The conditions of the external environment, such as room temperature and humidity, must be maintained.

STEP2: Model Program Generation and Support Adjustment

A program for model formation is created. Depending on the shape, it may be necessary to adjust the degree of tilt and the position of the supports.

STEP1: CAD File Submission

Upload your CAD to our online quoting platform.

STEP 3: Rendering and Scene Integration

We can also handle exterior modeling and interior structure design based on illustrations. After creating the 3D models, we can create a rendering to fit a scene. We can deliver images even if we do not proceed with production.

STEP 2: Detailed Design and 3D Modeling

Once the design is determined, drawings and 3D models will be created. The structure will be examined, taking into consideration not only the external design but also functionalities such as mating and sliding.

STEP 1: Initial Design Consultation

The first step is a meeting to discuss the project. Drawings are not required for this meeting. We will create a design from a sketch based on the overall image and concept that you have in mind.

STEP5: Quality Assurance and Inspection

We perform quality inspections. At INAC, where quality comes first, we use CMMs, gauges, and other equipment for precision checks.

STEP4: Post-Casting Finishing

Vacuum casting materials are cured and then taken out of the silicone rubber mold. Then we perform finishing such as deburring and gating, and they are made into finish products.

STEP3:Material Injuction

Liquid casting material is injected into the silicone rubber mold in a vacuum environment.　

STEP2: Mold Preparation

The silicone mold is cut open into a male and female mold, and the master model is removed.

STEP1: Mold Creation

The master model is fixed to a wooden frame and silicone is poured to create a mold.