VISUALIZED LINEAR COVER

Linear Cover

Mechanism design

VISUALIZED LINEAR COVER

FOR SAVING TIME AND COST IN EQUIPMENT INSPECTION!

We offer customized transparent housings that can be used to increase the efficiency of equipment inspection by making the equipment components visible.

The internals can be visually inspected without removing the cover.

Benefits include a reduction of inspection man-hours, early detection and prevention of equipment issues.

● Material
・ We will consult with you regarding PC, acrylic, transparent casting, etc.

● Merits of our arrangement
-Can be produced without drawings.
* If you provide us with the actual product, we will measure or mold it from the actual product
・ Customization such as shape change is also available
・ Depending on consultation, 3D modeling of shape is also possible

 

Please feel free to contact us.
Adequate support will be provided by our experienced designers until prototype completion.

LINEAR COVER VISUALIZATION

CANORBEA VISUALIZATION-1

CANORBEA VISUALIZATION-2

Back to Portfolio
 

COPYRIGHT © 2020 INAC US. ALL RIGHTS RESERVED. INAC Inc  – PRIVACY POLICY

STEP5: Quality Assurance and Precision Inspection

A quality inspection is performed. At INAC, where quality comes first, we use CMMs, gauges, and other equipment for precision checks.

STEP4: Post-Processing and Finishing

Finishing is done by removing the supports, polishing, and applying transparency treatment. It is also possible to paint and apply plating to the formed product.

STEP3: UV-Laser Print Formation (SLA Process)

Output: The product is formed by irradiating the liquid with a laser beam of UV light and laminating it. The conditions of the external environment, such as room temperature and humidity, must be maintained.

STEP2: Model Program Generation and Support Adjustment

A program for model formation is created. Depending on the shape, it may be necessary to adjust the degree of tilt and the position of the supports.

STEP1: CAD File Submission

Upload your CAD to our online quoting platform.

STEP 3: Rendering and Scene Integration

We can also handle exterior modeling and interior structure design based on illustrations. After creating the 3D models, we can create a rendering to fit a scene. We can deliver images even if we do not proceed with production.

STEP 2: Detailed Design and 3D Modeling

Once the design is determined, drawings and 3D models will be created. The structure will be examined, taking into consideration not only the external design but also functionalities such as mating and sliding.

STEP 1: Initial Design Consultation

The first step is a meeting to discuss the project. Drawings are not required for this meeting. We will create a design from a sketch based on the overall image and concept that you have in mind.

STEP5: Quality Assurance and Inspection

We perform quality inspections. At INAC, where quality comes first, we use CMMs, gauges, and other equipment for precision checks.

STEP4: Post-Casting Finishing

Vacuum casting materials are cured and then taken out of the silicone rubber mold. Then we perform finishing such as deburring and gating, and they are made into finish products.

STEP3:Material Injuction

Liquid casting material is injected into the silicone rubber mold in a vacuum environment.　

STEP2: Mold Preparation

The silicone mold is cut open into a male and female mold, and the master model is removed.

STEP1: Mold Creation

The master model is fixed to a wooden frame and silicone is poured to create a mold.